Abstracts of the VKRT meetings of Plastic and Rubber sector      


To receive NewsMeeting

To unsubscribe NewsMeeting


  Abstracts bijeenkomsten: Selecteer & Consulteer

Abstracts for "Polymers"

Vulcanization of silicone rubber, different chemistry and the effects on process parameters and applications

The silicone rubbers are classified according to the different vulcanization ( RTV1, RTV2, HTV, LSR). Based on the chemistry of reactions the vulcanization (condensation, radical und addition curing) is described including main components and byproducts. The different reactivity and the resulting set up for the process parameters are explained. The type of vulcanization influences also the properties of the cured end product and their acceptance for different end uses like industrial, food contact and medical applications.

  • Special over vulkaniseren en crosslinken - 2014  

Crosslinking of fluoroelastomers and the influence on final properties

Crosslinking of rubber materials generates chemical bonds between chain segments and forms a stable three dimensional structure. The properties of uncured rubber are changing from more viscous behaviour with high remaining deformations to high elastic deformation behaviour after crosslinking that minimizes the irreversible flow. As specialty rubbers like FKM and AEM are used in demanding environments, the crosslinking process is important to provide materials that can withstand e.g. high temperatures. At current, fluoroelastomers are cured with crosslinking systems based on bisphenol or a combination of peroxide with coagent. Crosslinking mechanisms will be presented as well as efficient designs to control rate and state of cure. In addition, the appropriate final properties of the elastomers will be discussed. Regarding the crosslinking with bisphenol, the influence of polymer structure and metal oxides will be shown.

  • Special over vulkaniseren en crosslinken - 2014  

Chemistry of EPDM vulcanisation

Terpolymerisation of ethylene, propylene and a diene monomer results in EPDM polymers, which i) have a low glass transition temperature and are amorphous (or very low crystalline) at application temperatures and ii) can be crosslinked, and, thus, can be applied as an elastic rubber. Because of its low level of unsaturation in side groups, EPDM has an excellent resistance against oxygen, ozone, heat and irradiation. The apolar character of EPDM and the very high entanglement density explain the very high acceptance of plasticiser oil and, as a consequence, of carbon black. Combined with the very low density, EPDM compounds are among the most cost-effective rubber products. The apolar character also results in a poor resistance against oil and apolar solvents though. EPDM is the largest, non-tire, synthetic rubber (1100 kton/year) with main applications in outdoor and elevated temperatures, such as automotive sealing systems, window gaskets, roof sheeting, hoses, tires and tubes, mechanical goods, wire & cable and thermoplastic vulcanisates. Crosslinking of EPDM is typically performed with accelerated sulfur (~80%), sometimes with peroxide and, for special applications like thermoplastic vulcanisates, with activated resol systems. The current views on the chemistry of these 3 EPDM vulcanisation systems will be presented, supported by results from experimental studies using state-of-the-art analytical techniques. Recent developments by LANXESS, such as high-VNB-EPDM for enhanced peroxide curing efficiency and the use of zeolites to improve the cure characteristics of resol curing will be highlighted.

  • Special over vulkaniseren en crosslinken - 2014  

Estane® novelties in interior / exterior automotive parts

Lubrizol engineered polymers provides innovative solutions in the form of highly versatile, easy-to-process polymers that can be converted by extrusion and injection moulding processes. Lubrizol seeks to introduce the latest novelties and current success stories within the automotive industry, as well as major breakthroughs focusing on cost-down solutions, lightweight, comfort and aesthetics.


Lubrizol’s extensive Estane® TPU includes a differentiated portfolio of solutions, such as:

  • Aliphatic TPU technologies
  • Pearlcoat® ACTIVA low gloss portfolio
  • Foaming TPUs
  • Isoplast® ETP (hard and high flexural modulus polyurethane)
  • Bio TPUTM by Lubrizol*
  • TPU for Adhesives

The scope of Estane® engineered polymers crosses many end uses such as under the bonnet applications (high heat cables, fuel bowls, …), interior parts (central console, door panels, seats, gear knobs, shutter pads,...) and exterior parts (paint protection film, safety glass, glass lamination,…).

*bio-based content, plant-based, 29-70% as determined according to ASTM-D6866.

  • Automotive - 2015  

Fluorpolymeren in automobiel toepassingen


De presentation van 3M geeft een overzicht van de noodzaak van het gebruik van fluorpolymeren in verschillende automobiel toepassingen.
De focus ligt op het gebruik van fluorelastomeren toegelicht met een aantal toepassigsvoorbeelden in powertrain, fuel en air management..

Aansluitend volgt nog een korte introductie van NST, een nieuwe sealing concept voor dynamische dichtingen op basis van PTFE en een overzicht van 2K, de combinaie van FKM met Stanyl polyamide 46.


  • Automotive - 2015