Improving Rubber Performance with Naphthenic Plasticizers
Dr. Markus Hoffmann, Technical Manager, CMI/TYR , Naphthenics, NYNAS AB
“Improving Rubber Performance with Naphthenic Plasticizers”
Dr. Markus Hoffmann
markus.hoffmann@nynas.com
Nynas AB, SE-149 82 Nynäshamn, Sweden
Fueled by ever-increasing demands on automotive engine oil performance, an appetite for significantly larger volumes of paraffinic base oils of API Group II and Group III is growing. As a consequence, the European base oil production landscape is changing rapidly, with closures of many Group I production base oil trains. This leaves Europe well over 1,200,000 t per year short of paraffinic Group I supply; oil which finds use across the industry e.g. as rubber process oil. Thus, suitable replacement oils are needed across a wide viscosity range. However, modern paraffinic base oils show insufficient solvency for polar rubbers. In addition, the viscosity ranges offered by Group II refineries are limited, and in the case of Group III and GTL severely limited. Naphthenic base oils are in rich supply in Europe and worldwide and will be able to replace conventional Group I use, in many cases without needing significant reformulation efforts.
In this study, we will discuss the influence of various process oils on the physical and mechanical properties of different rubber and tire compounds.
Natuurrubber, het blijft een intrigerend materiaal
Jacques W.M. Noordermeer, Wil Aben, namens het Bestuur van de Rubber-Stichting
Samenvatting van de research-projecten gesponsored door de Rubber-Stichting gedurende de recente jaren.
De Rubber-Stichting beheert de gelden die overbleven na het opheffen van haar activiteiten en de verkoop van de gebouwen van de stichting. De stichting heeft tot doel de opbrengsten ten nutte te maken voor de promotie van Natuurrubber.
Reeds enkele jaren sponsort de Rubber-Stichting de opleiding van jonge wetenschappers, in het bijzonder PhD-studenten, in onderwerpen welke op Natuurrubber betrekking hebben. De betreffende studenten voeren de onderzoeken uit binnen een samenwerkingsverband tussen de Prince of Songkla University, Pattani Campus in Thailand, en de Universiteit Twente, leerstoel Elastomer Technology and Engineering. De Prince of Songkla University is binnen Thailand meest vooraanstaand op het gebied van Natuurrubbertechnologie. De studenten verkrijgen een zgn. double-PhD: een PhD van de Universiteit Twente op basis van de verdediging van hun proefschrift; op vertoon van het diploma ontvangen zij eveneens een PhD van de Prince of Songkla University.
Inmiddels hebben een drietal PhD-studenten hun opleiding voltooid en zijn twee nieuwe studenten aan hun opleiding begonnen. De titels van de drie voltooide proefschriften luiden:
In de lezing wordt een korte samenvatting van de resultaten van genoemde proefschriften gepresenteerd.
The rubber industry energized by LANXESS. Past, Present, Future!
Oliver Osborne, Lanxess Elastomers BV, Head of Global Marketing
"The rubber industry energized by LANXESS. Past, Present, Future!"
Oliver Osborne. Head of Global Marketing, Head of Global Marketing
Like the VKRT, EPDM rubber is produced close to 50 years and in 3 years time the same is true for Keltan (1967 first production in Geleen).
Many developments have taken place in these years for Keltan EPDM and also for LANXESS.
Although the EPDM industry is by some seen as a commoditized product, the developments in the last years clearly show this is not the always case.
In this presentation the market and product developments will be shown from the past, the present as well the expectations for the future.